A hybrid homogeneously weighted moving average control chart for process monitoring

Several modifications and enhancements to control charts in increasing the performance of small and moderate process shifts have been introduced in the quality control charting techniques. In this paper, a new hybrid control chart for monitoring process location is proposed by combining two homogeneously weighted moving average (HWMA) control charts. The hybrid homogeneously weighted moving average (HHWMA) statistic is derived using two smoothing constants λ₁ and λ₂ . The average run length (ARL) and the standard deviation of the run length (SDRL) values of the HHWMA control chart are obtained and compared with some existing control charts for monitoring small and moderate shifts in the process location. The results of study show that the HHWMA control chart outperforms the existing control charts in many situations. The application of the HHWMA chart is demonstrated using a simulated data.     

干湿联合冷却塔冷却节水分析软件开发及应用

为实现对干湿联合冷却塔冷却特性、节水特性的综合分析，编制干湿联合冷却塔校核计算流程，基于Visual Studio开发平台，本文开发了干湿联合冷却塔冷却节水特性分析优化软件。通过对某在运干湿联合冷却塔进行冷却节水特性计算，验证了所开发软件计算结果的准确性；在消雾节水计算结果基础上，对标干湿联合消雾冷却塔验收测试规程，生成其成雾频率曲线、耗水量曲线、塔雾指数、冷却特性曲线，综合分析其消雾特性、节水特性及冷却特性，从而确定了干湿联合冷却塔的最佳运行工况。同时运用所开发软件对比分析了某冷却塔设计干段散热面积对其消雾特性、节水特性及冷却特性的耦合影响，并分析了百叶窗开度对干湿联合冷却塔性能的影响，为干湿联合冷却塔的运行优化和设计优化提供了工具性软件支持。     

Al-Cu合金片对钢/铝异种金属激光-MIG复合焊接头组织和性能的影响

采用PLC系统控制的激光-MIG复合焊接工艺对Q890钢/6063铝合金进行异种金属焊接,研究了钢侧坡口表面添加Al-Cu合金片对接头显微组织、硬度和拉伸性能的影响。结果表明:激光-MIG复合焊接接头具有典型的熔钎焊特征;未添加Al-Cu合金片的接头界面层由舌状相Fe2Al5和粗大针状相Fe4Al13组成,厚度约18μm,添加Al-Cu合金片后由舌状相(Fe,Cu)2Al5和细小絮状相(Fe,Cu)4Al13组成,厚度约为9μm,焊缝区与热影响区的组织与未添加Al-Cu合金片时的相似;添加Al-Cu合金片的接头界面层硬度比未添加Al-Cu合金片的低约59HV;添加Al-Cu合金片的焊接接头的抗拉强度比未添加Al-Cu合金片的提高了109.8%,未添加和添加Al-Cu合金片的焊接接头均在界面层断裂。     

Event-triggered variable horizon Supervisory Predictive control of hybrid power plants

The supervision of a hybrid power plant, including solar panels, a gas microturbine and a storage unit operating under varying solar power profiles is considered. The Economic Supervisory Predictive controller assigns the power references to the controlled subsystems of the hybrid cell using a financial criterion. A prediction of the renewable sources power is embedded into the supervisor. Results deteriorate when the solar power is unsteady, owing to the inaccuracy of the predictions for a long-range horizon of 10 s. The receding horizon is switched between an upper and a lower value according to the amplitude of the solar power trend. Theoretical results show the relevance of horizon switching, according to a tradeoff between performance and prediction accuracy. Experimental results, obtained in a Hardware In the Loop (HIL) framework, show the relevance of the variable horizon approach. Power amplifiers allow us to simulate virtual components, such as a gas microturbine, and to blend their powers with that of real devices (storage unit, real solar panels). In this case, fuel savings, reaching 15%, obtained under unsteady operating conditions lead to a better overall performance of the hybrid cell. The overall savings obtained in the experiments amount to 12%.     

A novel quasi-oppositional harmony search algorithm and fuzzy logic controller for frequency stabilization of an isolated hybrid power system

The intermittent wind power in isolated hybrid distributed generation (IHDG) may cause serious problems associated with frequency (f) and power (P) fluctuation. Energy storage devices such as battery, super capacitor, and superconducting magnetic energy storage (SMES) may be used to reduce these fluctuations associated with f and P. This paper presents a study of IHDG power system for improving both f and P deviation profiles with the help of SMES. The studied IHDG power system is consisted of wind turbine generator and diesel engine generator. Both f and P control problems of the studied power system model are addressed in presence or absence of SMES. Fuzzy logic based proportional–integral–derivative (PID) controller with SMES is used for the purpose of minimization of f and P deviations. The different tunable parameters of the PID controller and those of the SMES are tuned by a novel quasi-oppositional harmony search algorithm. Performance study of the IHDG power system model is carried out under different perturbation conditions. The results demonstrate minimum f and P deviations may be achieved by using the proposed fuzzy logic based PID controller along with SMES.     

Trivariate maximum entropy distribution of significant wave height,wind speed and relative direction

A trivariate maximum entropy distribution of significant wave height, wind speed and the relative direction is proposed here. In this joint distribution, all the marginal variables follow modified maximum entropy distributions, and they are combined by a correlation coefficient matrix based on the Nataf transformation. The methods of single extreme factors and of conditional probability are presented for the joint design of trivariate random variables. The corresponding sampling data about significant wave heights, wind speeds and the relative directions from a location in the North Atlantic is applied for statistical analysis, and the results show that the trivariate maximum entropy distribution is sufficiently good to fit the data, and method of conditional probability can reduce the design values efficiently.     

Integrated sizing and scheduling of wind/PV/diesel/battery isolated systems

In this paper we address the optimal sizing and scheduling of isolated hybrid systems using an optimization framework. The hybrid system features wind and photovoltaic conversion systems, batteries and diesel backup generators to supply electricity demand. A Mixed-Integer Linear Programming formulation is used to model system behavior over a time horizon of one year, considering hourly changes in both the availability of renewable resources and energy demand. The optimal solution is achieved with respect to the minimization of the levelized cost of energy (LCOE) over a lifetime of 20 years. Results for a case study show that the most economical solution features all four postulated subsystems.     

Interaction of tRNA with Eukaryotic Ribosome

This paper is a review of currently available data concerning interactions of tRNAs with the eukaryotic ribosome at various stages of translation. These data include the results obtained by means of cryo-electron microscopy and X-ray crystallography applied to various model ribosomal complexes, site-directed cross-linking with the use of tRNA derivatives bearing chemically or photochemically reactive groups in the CCA-terminal fragment and chemical probing of 28S rRNA in the region of the peptidyl transferase center. Similarities and differences in the interactions of tRNAs with prokaryotic and eukaryotic ribosomes are discussed with concomitant consideration of the extent of resemblance between molecular mechanisms of translation in eukaryotes and bacteria.     

A pseudo-likelihood approach for estimating diagnostic accuracy of multiple binary medical tests

Latent class models with crossed subject-specific and test(rater)-specific random effects have been proposed to estimate the diagnostic accuracy (sensitivity and specificity) of a group of binary tests or binary ratings. However, the computation of these models are hindered by their complicated Monte Carlo Expectation–Maximization (MCEM) algorithm. In this article, a class of pseudo-likelihood functions is developed for conducting statistical inference with crossed random-effects latent class models in diagnostic medicine. Theoretically, the maximum pseudo-likelihood estimation is still consistent and has asymptotic normality. Numerically, our results show that not only the pseudo-likelihood approach significantly reduces the computational time, but it has comparable efficiency relative to the MCEM algorithm. In addition, dimension-wise likelihood, one of the proposed pseudo-likelihoods, demonstrates its superior performance in estimating sensitivity and specificity.